Category Archives: Architecture and Design

10 Clever Ways to Re-Purpose Your Furniture

They say ‘one man’s trash is some other guy’s treasure’ and that’s true, but that does not imply you cannot take your personal junk and make it a treasure over again. By reusing your antique furnishings, you can upload some exceptional appeal to your house d├ęcor. Not simplest that however being able to re-motive furniture is truely quite a few fun. From cabinets to dressers to antique doors to countertops, some thing can be repurposed. All it takes is only a little creativity. So, the subsequent time you are geared up to throw away that vintage facet desk that you’ve been preserving directly to for years, take a look at those 12 clever methods to repurpose your fixtures earlier than you do. You would possibly get a touch proposal.

1. Use an old door as a headboard

If you have got an antique wood door just lying round why not attempt repurposing it as a headboard to your bed. By sanding down any difficult edges, your bed could have an delivered rustic aptitude. Plus, it’s certainly easy to do. All you want is a sander (or simply sandpaper) and a chunk of putty.

2. A bookcase can become a bar
No concept what to do with that old antique bookshelf? The solution is simple: make a bar! By using the shelves to keep glasses, liquor, martini shakers, and perhaps multiple books, you’ll have a high-class bar right for your den, basement or dwelling room. Complete the appearance by adding wine holders and wine glass holders.

Three. Turn a window into a cabinet door
If you’ve got a window that’s intact with lots of character however too antique to really use, then strive creating a cabinet door out of it. You can both make a cupboard or locate one with out a door. Either manner, connect a handle and hinges to the window, attach it to the cabinet, and you are executed. Simple and easy.

4. A cloth wardrobe into a bench
Do you’ve got an vintage dresser which you cannot find any use for? Just turn it right into a bench. A bit of slicing, sawing, and screwing and you’ll have a pleasing seat for one or . If you seal and paint it with exterior merchandise you may even region it out of doors.

5. A buffet cupboard turns into a espresso station
Turning a buffet cabinet right into a espresso station is the perfect component to do. All you have to do is do away with the pinnacle of the cupboard and update it with a kitchen countertop. This will look top notch in the kitchen as a espresso station. Put your mugs, espresso maker, and cream and sugar right here for a high-class appearance.

6. Turn a chair into a nightstand
Do you’ve got a chair you adore but it doesn’t suit your different chairs? Turn it right into a nightstand or (if it is massive sufficient) a table. All you need to do is take off the back and simply use the seat.

7. Turn antique aspect tables into stools
A nightstand or facet desk can be without difficulty converted into a stool via sincerely including a cushion to the top. This is in particular beneficial when you have lots of aspect tables for some cause.

Eight. An easel will become a TV stand
A massive and heavy-obligation artist’s easel can without difficulty turn out to be a TV stand if it’s sturdy enough. Plus, it adds an thrilling dimension on your living room and is a outstanding verbal exchange piece. Just place the TV on the lowest shelf and convey the pinnacle one down as in case you were propping up a canvas.

9. Turn a secretary table into a linen cabinet
Secretary desks, in particular those with a tall hutch, can be repainted and located within the bathroom or hallway as a linen cupboard. Best of all, there’s slightly any fussing required.

10. A chest becomes a espresso desk
If you have got a heavy duty timber chest or trunk this is the right peak, then you can without problems flip it into a coffee desk. Just use a sealer at the pinnacle or location a pane of glass. If you are truely accessible with gear you could make the top open up like a garage door.

DIY Steps To Protect Patio and Outdoor Furniture

Though the outdoor furnishings is made from All-climate substances, however one has to behave wisely to lengthen the existence of it. Don’t leave the whole thing to manufacturer’s hand as they are not give up users. This article sheds some light on the safety of the furniture. Follow the underneath indexed steps to improve the software of the furniture.

Step 1:

Generally the patio furniture is uncovered to all forms of the pollutants. So brush them to get rid of the dirt.

Check for any damages. If any, clean the difficulty. Otherwise your efforts will run in vain.

Separate upholstery and body of the furniture piece as they should be wiped clean separately.

But wicker furniture is altogether extraordinary. They have to be protected with hose. Wooden and metal furniture may be wiped clean with a sponge.

To ease the cleansing procedure, use a cleansing solution which is particular to the cloth you’re the use of.

Step 2:

Upholstery protection- The upholstery of the out of doors fixtures is sensitive. Fabric upholstery wishes a bit greater protection. The upholstery defines the splendor of the furniture. So it need to be washed well to shed its gloomy appearance. After washing, it must be dried nicely to keep away from mold. If there’s less sunlight, then use electric powered dryers. Dry it till moisture degree reaches 0. Then follow a cloth protector which doesn’t have an effect on the nature of the material. It have to be sprayed seasonally to all the cloth portions to increase the life.

Step 3:

Frame safety- As it is said within the first step, the body need to be dealt separately.

UV radiation from the sun and rain are primary reasons of harm. Look for an Outdoor fixtures protector which negates the bad effects of weather. It can be applied to plastic and steel furnishings frames with a paint brush.

For timber frames, follow a regular paint. Pigments in the paint can defend furniture from warmth and water. The wood body need to be painted periodically because the paint at the frame has a tendency to chip and wither.

The protector need to be carried out in a ventilated location via the usage of masks and gloves to keep away from any untoward incidents.

Step 4:

Make them resistant in opposition to stains and water- A small stain can damage the enchantment of the furnishings. So, apply a stain and water repellant for each years. The water repellant prevents the water from accomplishing the lowest layers of the wooden and also fastens the evaporation procedure. Avoid the use of repellents, which have a excessive oil content material.

Guide to Irrigation Systems

Water and time conservation: The opportunity to irrigation structures is a hose or watering cans. If you have used any, you understand that it takes time, it is tiring, and consumes a whole lot of water. When you put money into an irrigation gadget, it comes with timers that you could set for your liking. This method that you may go away for a weekend and the unit will paintings through itself. The unit also consumes most effective little water which sees you spending just a little of it.

Increase in home fee: Simple matters are those that decorate the price of a domestic. Of these items is the exceptional of your lawn. The greener it’s far, the better the high-quality of the house. Due to this, if you are a domestic vendor, you’ll promote the residence at a higher rate.

Preservation of soil shape and vitamins: When you water your plants with a watering can or lawn hose, you permit a whole lot of water to seep into the soil. Due to this, vitamins leach out leaving the land with only some vitamins. It’s additionally not unusual for the soil to be compacted when you water the vegetation with a hose. Soil compaction affects the plants negatively. The plant life may additionally begin withering or maybe broaden root illnesses. When you use an irrigation machine, none of this takes place which keeps your plants in pinnacle shape.

Prevents weeds and sicknesses: When you use irrigation systems consisting of specialized drip irrigation structures, you direct water to the rootball of each plant-you don’t sprinkle the complete garden. As a end result of this, the encompassing weeds do not geminate; for that reason you have much less weeding to do.

Experts additionally record that after there may be water at the roots, your plants don’t suffer from leaf illnesses that result from status droplets on the foliage. It’s also uncommon for the plants to have blight conditions as water would not strike the leaves.

Growth development: Studies display that whilst you water the flora with small quantities of water over a protracted length, the plant life generally tend to grow faster as you may be supplying them with a super situation for increase. Due to this, you stand to enjoy greener and greater luscious lawns and gardens.

Guide to shopping for irrigation systems

For you to get the benefits that include the set up of the irrigation systems, you want to buy the proper ones. One of the elements to don’t forget is the fine of the structures. Just like any other thing, the decrease the great of the device, the less correctly it’s going to paintings. Also, the much more likely it will come aside within a brief time. To be on the secure aspect, spend money on a high nice machine a good way to no longer best final for a long term, however also consume little water. You additionally have to consider the brand of the gadget. As you would possibly have guessed, the greater famous the brand is, the better the unit is.

Guide to Burning Tree Stumps

If you are seeking out an inexpensive and clean way to put off vintage tree stumps, you have to don’t forget burning them down. This approach is a totally popular manner to get rid of tree stumps without using any essential device or gear. Furthermore, the fee is extensively decrease than professional stump elimination or stump grinding carrier given that all you need are a few over-the-counter, store-offered merchandise. You can count on to spend everywhere from $20 to $100, relying on the dimensions and amount of the tree stumps. Additional equipment can be required as well, such as a energy drill with wood-uninteresting bit, a gardening spade, compost, and greater. Continue below to see what you may need this unique technique of stump removal.

How to Burn a Tree Stump

This approach isn’t endorsed for each person that doesn’t have experience working with open flames and fire. It is also by no means advocated for areas that are dry or combustible. If you do select to burn your tree stumps, it is important to apply strict inner safety standards. Learn what those are before getting began.

You have to also ask your local hearth department approximately the nearby ordinances for burning tree stumps. A allow can be required in your network, or it is able to not be allowed at all. Also, potassium nitrate is a relatively-explosive chemical, so there can be bans, regulations, or garage regulations on your county.

What You Need:

Potassium Nitrate or Saltpeter
Dry Scrap Wood
Soil (optionally available)
Grass Seed (optionally available)
Power Drill
1-Inch Wood Boring Bit or Spade Bit
8-Inch or 10-Inch Bit Extender
Garden Trowel
Bucket
Funnel
Hot Water
Shovel
Matches

Directions:

After you’ve got checked along with your nearby fire department and city ordinances regarding fireplace use and burning tree stumps, you’re prepared to get started. Never try to burn anything outside at some point of a dry season or fireplace ban. This should result in devastating accidents and damages.

Here’s the way to get commenced:

Put your drill and drill bit together together with the bit extender. Fill your bucket with a gallon of warm water.

Starting on the top-middle of the stump, drill a hollow at a 30 diploma perspective and drill 10 inches deep.

Clean out the inner particles and keep to drill holes throughout the complete stump, starting from the center and ending at the edge. Keep holes 1 inch apart.

How To Level A Floor Before Tiling

Are you making plans on putting in a brand new tiled floor? If so then it is crucial to make it flat as possible. Tiled floors look lovely. On the opposite hand a sloppy task can come to be looking horrible, and creating plenty greater give you the results you want. Not to say the value involved will extra than double if you turn out to be having to redo it.

Firstly you need to ensure your floor can take the weight of tiles with a view to lay on it. Concrete flooring are more likely to be robust, which lead them to ideal. However, you have to nevertheless take a look at to look if it’s miles degree. We recommend a self-leveling concrete to get a great degree floor.

Before starting your ground levelling venture, it is vital that you have the right equipment, substances and techniques available. Ensure you have the subsequent before beginning this venture:

Floor leveling compound
A Four-foot degree Nylon String
A Trowel
A Drill and Mixing bucket
A Five-gallon bucket

Step 1

Identify the high and low spots by way of using a stage. Mark out any low spots using a pencil by using drawing huge circles around them.

Step 2

Mix up a few floor leveler inside the bucket (in line with the levelling compound commands). Usually this involves a bucket being filled with two inches of water. You then pour in sufficient levelling compound to cover it. You then blend the compound with the water till you have got a steady texture. The levelling compound instruction will let you know the water to powder ratio. Remember that your weather can change how nicely your levelling compound mixes. You may additionally should make changes.

Step three

Keep adding levelling compound and water until you have a full gallon combination. The combination have to have the consistency of the skinny soup.

Step 4

Pour your mixed levelling compound batch over low spots which you marked earlier. Always work your manner out from the nook, furthest from the door. Give it time to settle and level out earlier than pouring more. Use your trowel to flatten any spots wherein the leveler does not flatten itself.

Step five

Fill inside the remaining low spots even as chickening out the room as you cross. Let it set for at the least 24 hours. You are then geared up on your next step, that is tiling the ground.

Tiling Your Perfectly Flat Floor

Floor levelling compounds are fast curing. This manner you want to paintings speedy before it dries. Some may even be walked on within three hours. However, it is encouraged you leave you new floor for as a minimum 24 hours to be sure the coating has cured sufficiently.

Before installing tiles, take a look at the surface of your ground cautiously to make sure that it is perfectly clean and loose from defects. Things to appearance out for is irregularities, water damage, or vulnerable joists.